Roll Bender R-M40

---

Specifications
Capacity	Size	Min Diameter
Pipe	1.5” (sch.40)	28"
Round Tube	2.375” (.078”)	27.55"
Square Tube	1.5” (.083”)	39"
Angle Iron	1.5” (.1875”)	22"
Solid Square	1.25”	20"
Solid Round	1.375”	24"
Flat Bar Easy Way	3"(.5")	15.75"
Flat Bar Hard Way	2.25" (.375')	20"

Specifications
Roll Adjustment	Manual
Pinch	Single
Shaft Diameter	1.181"
Roll Diameter Upper	5.181"
Roll Diameter Lower	5.181"
Shaft Center Distance (lower rolls)	10.88"
Driven Rolls	2
Digital Readout	N/A
Speeds	10.6-21.2 rpm (variable)
Motor	2 hp
Power Requirement	220v / 1 phase
Shipping Dimensions (L/W/H)	60” / 44” / 68”
Shipping Weight	560 lbs