|
Home > Ring and Angle Roll Benders > R-H80 Double Pinch Roll Bender
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Lease to own for $ per month! |  |
| SPECIFICATIONS: | |
Shaft Diameter |
2.75" |
Upper Roll Diameter |
9.64" |
Lower Roll Diameters |
9.64" |
Shaft Speed |
8 rpm |
Hardened Rolls for standard profiles included with machine. Hydraulic adjustment of bottom rolls up or down - independently |
|
| Capacities: R-H80 Roll Bending Machine | ||
Mild Steel |
Max. Size OD/Wall |
Min. Dia. |
Flat Bar (Hard Way): |
3” (.50) |
27.55” |
Flat Bar (Easy Way): |
5” x 1” |
23.62” |
Solid Square Rod: |
1 3/4" |
19.68” |
Solid Round Rod: |
2” |
19.68” |
Round Tube: |
4” (.09) |
47.24” |
Pipe: |
3” Sched 10 |
27.55” |
Rectangular Tube: |
3 x 1” (.11) |
31.49” |
Square Tube: |
2 3/4” (.11) |
51.18” |
Angle Iron (Leg Out): |
3 x 3” (.31) |
31.49” |
Angle Iron (Leg In): |
2 3/4 x 2 3/4” (.11) |
27.55” |
T-Bar (Leg Out): |
2 3/4” (.31) |
31.9” |
T-Bar (Leg In): |
3” (.35) |
31.49” |
Channel (Legs Out): |
4 3/4” x 2” |
23.62” |
Channel (Legs In): |
4” x 2” |
19.68” |
I Beam (Hard Way) |
4 3/4” x 2 1/4” |
23.62” |
| ELECTRICAL EQUIPMENT AND CONTROLS: | |
Electronics: |
220V Three-Phase @ 60Hz, 4HP |
Weight: |
3,300 lbs. |
Dimensions (l x w x h): |
56" x 38" x 52" |
Technical Specifications and Standard Equipment:
S
- Three Rolls are Powered
- Steel Construction Frame
- Rolls Shafts are Special Steel Materials
- Rolls are Hardened and Ground
- Horizontal and Vertical Working Position
- Brake Motor equipped
- Standard Rolls
- Mobile Control Panel
- 3-Axis Mechanical Lateral Angle Guide Rolls
- Users manual book
- Digital Read-Outs (2 pcs.)
- Pipe, Tube and Profile Bending Rolls
Click below to download Acrobat Reader
Specifications subject to change without notice.