Home > Ring and Angle Roll Benders > R-M10

Roll Bender R-M10

(Click Picture to Zoom)

"We purchased our RM-10 at the end of 2006 from M-Tech sales in Chicago. The packaging and palleting of the machine immediately caught our attention, it was done right! When we finally got the machine up on its stand we were impressed by the size and rigidity of the main casting, it was stout! The gears, bearing and shafts were of equal size and strength. Although the machine easily rolled the 1" schedule 40 aluminum pipe for the job we purchased it for it wasn't long until we were trying all kinds of different shapes and materials. Let's just say our creative juices are flowing! The RM-10 is a perfect addition to any shop that needs a back up solution for many rolling jobs but doesn't need to make the investment in a larger powered machine."
-- Buzz Morasca - Toobs Inc

Specifications
Capacity	Size	Min Diameter
Pipe	1" (sch.40)	28"
Round Tube	1.25" (.078")	31.5"
Square Tube	1.2"(.078"	35"
Angle Iron	1.25"(.157")	30"
Solid Square	.75"	20"
Solid Round	.875"	20"
Flat Bar Easy Way	2"	15.75"
Flat Bar Hard Way	.75"	6.5"

Specifications
Roll Adjustment	Manual
Pinch	Single
Shaft Diameter	1.181"
Roll Diameter Upper	3.86"
Roll Diameter Lower	4.65"
Shaft Center Distance (lower rolls)	3.86"
Driven Rolls	2
Speeds	N/A
Motor	N/A
Power Requirement	Manual
Shipping Dimensions (L/W/H)	60” / 44” / 68”
Shipping Weight	435 lbs

Technical Specifications and Standard Equipment

Two rolls are manually powered
Special cast frame
Shafts are hardened with special steel material
Rolls are special steel material hardened and ground
Gears milled with full material
Standard rolls, guide rollers, manual working
Users manual book

Optional Accessories

Special rolls

Click below to download Acrobat Reader

Specifications subject to change without notice.