SH-6010 HD Hydraulic Shear
 |
Lease to own for $ per month! |  |
| Specifications | |
| Max. Shear Length | 60" |
| Max Material Thickness - Mid Steel |
10 ga / .135”
|
| Max Material Thickness - Stainless Steel | 13 ga / .090” |
| Strokes / Minute | 26 |
| Front Gauge Length | 24" |
| Back Gauge Length | 24" |
| Shear Angle | 1 degree / 40’ |
| Motor | 5 hp |
| Power Requirement | 220 volt / 3 phase / 60 hertz |
| Shipping Dimensions (L/W/H) | 84” / 36” / 56” |
| Shipping Weight | 3500 lbs |
The SH-6010 hydraulic shear has a 60" wide cutting capacity to accommodate most sheet metal applications. Using powerful industrial grade hydraulics and a solid electro welded metal plate construction, this machine is capable of smoothly shearing through 10 gauge mild steel and 13 gauge stainless steel. The smooth movements extend blade life.
This hydraulic shears upper carriage is heavily built to minimize any deformation and the upper and lower blades have multiple shearing edges, both extend blade life. The operator has the controls to jog the upper carriage, produce one cut with one foot pedal push, or remain in an auto mode by holding the foot pedal down. Hold downs clamp the sheet solidly to the in feed table so the material doesn't lift when being sheared.
Like all other Baileigh Industrial metal shears, this one has been build to withstand years of service. The SH-6010 hydraulic shear is the perfect machine for any fabrication shop.