Tube Notcher and Pipe Notcher Lines
Tubing and Pipe Notchers
Baileighā€™s tube notcher line consists of a dozen models to choose from. These models consist of manual, hole saw, die cut, abrasive and end mill style machines. Baileigh is a market leader regarding notching machines in North America and Western Europe.
Baileighā€™s TN-50M, TN-125M and TN-200M manual pipe notcher line is perfect for low production notches in Schedule 40 pipe. These small compact machines can be wall or base mounted and use up very little space. These have been designed for years of use and do have replaceable die inserts. These are perfect for low production runs of straight 90 degree notches seen typically on some styles of go karts, play ground equipment, and in maintenance departments for repair or construction of hand railing applications.
The TN-200H hole saw tubing notcher is a low cost alternative for low production runs of notches with varying angles. It can be drill press mounted vertically or used horizontally with a portable drill on a welding or workshop table. This notching machine can notch up to 45 degrees. To support this machine Baileigh has a fantastic line of hole saws in all sizes.
Our TN-200E pipe notcher is an electrically powered die cut style machine for straight notches of 90 degrees. It comes standard with all pipe sizes up to 2ā€¯ Schedule 40. This is a high production machine that can be bench or base mounted. It is perfect for fence and gate applications, as well as play ground equipment.
The TN-300 tube notcher is an industrial grade hole saw style machine that can notch up to an incredible 75 degrees under the right circumstances with the right hole saw. This makes it a perfect machine for rock crawler chassis as well as other racing and off road chassis applications. This machine uses a powerful electric motor that is coupled to an industrial grade gear box. The hole saw spindle is mounted on a heavy V-box design carriage that drives the holes saw with little effort into the material that is actuated by turning a large hand wheel. This is a very rigid machine and it can be used on material up to 3ā€¯ OD. The self centering vise has a quick release for positioning and an offset adjustment.
Our abrasive tubing notcher line consists of the TN-400 and TN-600. These are very powerful notching machines that come in two versions. The TN-400 can handle a 4ā€¯ wide belt and can handle up to 2ā€¯ OD tubing. The TN-600 can handle a 4 or 6ā€¯ wide belt and can handle up to 3ā€¯ OD tube. These machines have self centering vises with offset adjustments with quick adjustments to the position on the belt and angle of notch. A smooth transfer system makes this an effortless machine to use and is perfect for thin or thick wall applications. This notching machine is perfect for structural, chassis, gates and fences and much more. Both models require 220 volts single phase power.
The TN-800 tube notcher uses a patented eccentric motion to cut through various sizes of tube or pipe up to 3ā€¯ OD by simply dialing in the size required. This machine pays for itself in tooling savings as other end mill style machines require a different size end mill for each different OD, which becomes very expensive. This tubing notcher has a heavy ductile iron frame to reduce vibration coupled to a heavy duty industrial grade transmission. This machine has a quick change adjustable vise with offset adjustments, a clutched operation wheel for safety and comes on a heavy duty portable stand for easy storage. The eccentric adjustment is quick and easy to use and will save the tens of thousands of dollars in tooling over the life of the machine. The TN-800 requires 110 volts so it is perfect for job sites. This machine is for the production minded hand railing or chassis builder.
Finally, we offer high quality replacement parts for all of our tube notchers including abrasive belts, end mills and hole saws. Please contact your Baileigh representative for further information. These quality notching machines are typically in stock for quick shipments.
