Baileigh Industrial Online: Horizontal Press Brake

Home > LF-20 Pittsburgh Machine

LF-20 Pittsburgh Machine

(Click Picture to Zoom)

Shown with optional flange attachment.

20-26 gauge

Uses approximately 1" of material

5/16" - 3/8" pocket depth

All steel forming head, hardened with ground shafts

Steel forming rolls are case hardened using matching cut gears and needle bearings throughout

Optional rolls: double seam, drive cleat, flange attachment, and right angle

220V, single-phase

Weight is 475 lbs

Rolls

Double Seam Rolls Drive Cleat Rolls Flange Attachment Right Angle Rolls

Capacity 20-26 GA 20-26 GA 20-26 GA 20-26 GA

Approx. Material Used 1" (25mm) 2-1/8" (54mm) up to 3/16" (5mm) up to 3/8" (9.5mm)

Size 3/8" Seam (9.5mm) 1-1/8" Width (28mm) up to 3/16" Height (5mm) up to 3/8" Height (9.5mm)

The Baileigh Pittsburgh machine is great for making Pittsburgh joints on sheet metal. These machines are typically used for HVAC duct work to make custom ducting. The picture above shows the Baileigh lock forming machine with the optional flange attachment.
The flange attachment is useful for creating a flange for easier fitting of the Pittsburgh joints. There are optional rollers available for this machine to create other types of joints. Give us a call today this machine is in stock and ready to ship.

Specifications subject to change without notice.