Semi-Automatic Cold Saws

Our line of miter cold saws consists of a manual cold saw line (with or without  pneumatic clamping on the vise), as well as semi-automatic mitering cold saws.  Each machine offers a two speed adjustment for most different materials like mild steel, chromoly, and stainless steel.  A cold saw uses a circular saw blade that runs in a bath of coolant increasing blade life, decreasing dusts and grit, with no sparks.  The real advantage of our cold saws compared to any band saw on the market is if the fabricator needs to use the machine as a miter saw. 

A cold saw can miter a true 45 degree angle with no burr and will be exact.  Using bands saws might have a slight taper and will definately have a burr to clean up before welding the miters together. 

Our cold saws are made of a very heavy casting and with our pivot point we eliminate chatter.  The heavier the cold saw the better, coupled with an industrial grade gear box will improve blade life.  Our cold saws should be specified if cutting round tube,  pipe, or solids; square or rectangular tubing or solids; and should be used in place of chop saws, band saws, abrasive saws, or circular saws. 

Baileigh Industiral cold saws have mitering capabilities of 150 degrees (90 degrees in one direction and 60 degrees in the other).  All Baileigh cold saws have double clamping vises, so both sides of the cut are clamped, for truer cuts and less likelihood of damage to the cold saw blades.  Please enter this page and see why a Baileigh cold miter saw is simply the best sawing machine on the market for the investment.