BS-350SA Dual Miter
Band Saws
 |
Lease to own for $ per month! |  |
| General Specifications: |
| Blade Size is 1" x .035" x 124.409" |
| Variable Blade Speed is 114' to 262'/min |
| Motor is 2HP |
| Measurements are 74"x30"x44" - Table Height is 35" |
| Weight is 1012 lbs. |
| Broken Blade tension device shuts down machine if blade breaks. |
| Semi Automatic Cutting Function with hydraulic vise |
| 220 Volt, 60Hz, Single Phase |
| Excellent Pricing: Call for Quote. |
| Capacity: | ||||
| Cutting Degree | 90° |
45° |
60° |
45° (L) |
| Round | 10½" |
9½" |
6-5/16" |
8¼" |
| Square | 10" |
8¾" |
6" |
7" |
| Rectangle | 13¾" x 8½" |
9½" x 6-5/16" |
6" x 6" |
7" x 7" |
- Semi- Automatic down feed and up feed
- Hydraulic clamping vise
- Cast iron saw head provides rigidity and swivels in two directions, 0-60 degrees (R) and 0-45 degrees (L)
- Direct gear drive helps extend saw blade life, and allows saw head to make more accurate cuts and cut faster.
- Dual descent modes: 1 -Manual descent mode is operated by pulling down on handle and actuating trigger switch. 2- Hydraulic descent feed can be adjusted by operator.
- Powerful coolant pump cools blade and assists chip removal system. We recommend using a petroleum or synthetic based coolant mixture that is typically mixed with water in a 1:10 ratio.
- Broken blade tension devise shuts down machine if blade breaks.
The gear driven BS-350SA is a 10-1/2" dual miter Semi Automatic Band Saw and is the perfect saw for cutting at 90 degrees or miter angles. This saw has a dual angle head capable of cutting 0-60 degrees (R) and 0-45 (L), making it one of the most versatile band saws on the market. Quick releases allow the operator to change the miter angle in seconds. The vise clamp uses a hand wheel coupled to a low ratio acme screw for positioning and a quick release and load hydraulic clamping system. Each gear driven semi automatic metal cutting band saw we offer has variable speed, miter heads, and a hydraulic controlled descent devise for perfect feeds and longer blade life. Our band saws have DC variable speed drives that offers consistent torque even at slower speeds, which increases blade life. Our band saws are constructed of a heavy cast iron saw head and base and the blades are guided via a tungsten carbide insert offering rigidity and accuracy. Each band saw has a powerful coolant system and a broken blade tensioning devise that shuts down the machine if the blade breaks. This machine is perfect for cutting solid bar stock, as well as tubing and pipe. Metal cut easily on the BS-350SA include mild and stainless steel, aluminum, chromoly and bronze. Plastics of many different sorts can be cut on this machine as well.
The BS-350SA series band saws hydraulic descent has a down feed adjustment for feed pressure. The saw head is automatically lifted when the cut is complete and is ready for the next cut. The hydraulic descent has a down feed adjustment for feed pressure. This metal band saw can cut up to 8-1/2"x13-3/4" rectangle. This model has service requirements of 220V, Single Phase, 60 Hertz. The BS-350SA horizontal band saw has a dual swiveling miter head, allowing the operator to miter 60 degrees in one direction and 45 degrees in the other direction. This series of horizontal band saw comes standard with a variable speed drive allowing the operator to fine tune the blade speed from 114' to 262' / min. The BS-350SA metal cutting saw requires a 1" wide saw blade by .035" wall thickness that is 125" long, making this series a very precise miter saw. We ship our mitering band saws with quality saw blades and recommend using a quality replacement blade manufactured by the likes of Lenox®, Starrett®, or Wikus®. Baileigh Industrial provides quality band saws at an exceptional value. We carry this machine in stock for same day shipments.